How Do You Reset A Harley-Davidson Key Fob

Do you own a Harley-Davidson bike but, due to any reason, you’re in need to reset your bike’s key fob? If so, then this article will be of great help to you.

To reset a Harley-Davidson key fob, turn the ignition on, press both turn signal buttons, enter the PIN code using the turn signals, and follow the on-screen prompts to reprogram the fob.

In this article, you’ll get to know all about the Harley-Davidson key fob, how do you reset a Harley-Davidson key fob, overriding PIN pre and post-2014 Harley-Davidson models, and more. Continue reading to get all the answers that you’re looking for.

What does Harley-Davidson Key Fob stand for?

FOB in your Harley-Davidson bike stands for Original Factory Code. It is a number that you’ll need for programming a new pin if your bike’s battery dies. Harley-Davidson security system will go into the PIN Protect mode or Flash Code 12 and a Service required message will appear on the screen, and this also happens when you’ve disconnected the bike’s battery from the bike.

Reset your Harley-Davidson Key Fob

How do you reset a Harley-Davidson key fob manually? This is a question that a lot of Harley-Davidson bike owners often have. They’re worried that they won’t find the passcode if their Harley-Davidson bike’s battery dies, and they’re unable to get it started.

A proximity fob is linked to a lot of the recent Harley-Davidson bike designs. Say that your security system isn’t able to sense the presence of the key fob around your bike. This way, you won’t be able to start the bike’s engine or drive around the city. The security system will also protect your Harley-Davidson bike from intruders and theft. The alarm will go off as soon as you switch off your bike’s engine and step away from it. The system also turns on and alerts you whenever it notices any abnormal motion or commotion. If the alarm stops working or the battery dies, you’ll need to reset the key fob.

Use the key fob to start your Harley-Davidson bike

The key and the PIN are important for your bike’s security system. Is there a way to start your bike if you don’t have the key fob? If you end up losing your key fob, you won’t be able to unlock your Harley-Davidson bike.

A Harley-Davidson key fob is a 5-digit number for your Harley-Davidson bike. You will require it if you want to lock or unlock your bike. If you’ve purchased a new bike, talk to your dealer, and they’ll give you the 5-digit PIN number. Once you have secured the PIN, you will be able to change it as often as you want.

You’ll require the PIN to start your Harley-Davidson bike. Start your bike by turning the ignition ON and then press and hold the button on the throttle. Once the security light flashes, press and hold the left-turn signal until the command appears on the speedometer.

For using your bike, you will have to enter the correct PIN. The valid PIN will be in flashing lights. You should then push the flashing red button and your motorcycle will start working.

How to reset the security system of Post-2014 Harley-Davidson bikes?

The latest Harley-Davidson bikes employ a key fob that allows the motorcycle to start only once the key fob is positioned close to it. When you are looking to change the original factory PIN to a new one, ensure that you’ve got the key fob close by – 

1. Select the digit combination that appeals to you. These numbers need to be easy to remember, as they will be the digits of your password. You might even note them in your diary or save the digits where they can be accessed easily.
2. Put your key fob near your Harley-Davidson bike. Turn on and off the bike’s ignition – Turn on, turn off, and turn on again.
3. Now, push the left-turn signal button thrice.
4. Press the right-turn button once before getting your hand off the button. Once you’ve released it, the turn indicator blinks up thrice or more before the existing PIN appears on the screen.
5. You’ll see the first PIN flashing on the screen. It’ll ask you to put the new PIN.
6. You should input the new PIN code by pressing the left-turn signal button. For instance, if the first digit of the new code is 3, press the left-turn signal button thrice to register it.
7. Press the right-turn signal button for adjusting. The new digit replaces the old digit in the odometer after you’ve released your hand from the button.
8. Now repeat the 5^th and 6^th steps until the old 5-digit PIN has been reset 
9. You’ll need to turn off the key for completing the Reset 

How to change the system security override PIN in Pre-2014 Harley-Davidson bikes

1. Select a 5-digit code and then record it either on a piece of paper or on the wallet card of the owner’s manual
2. With an assigned FOB, then the ignition key On – Off – On – Off – On
3. Press the left turn signal switch three times 
4. Press the right-turn signal switch once and then release (turn signals will flash thrice, the current Pin will appear in the odometer and the first digit starts flashing)
5. Enter the first digit of the changed PIN by pressing the left turn signal “x” times
6. Press the Right turn signal once and then release as the second digit will start flashing
7. Enter the second digit of the changed PIN by pressing the left turn signal “x” times
8. Press the Right turn signal once and then release as the third digit will start flashing
9. Enter the third digit of the changed PIN by pressing the left turn signal “x” times
10. Press the Right turn signal once and then release as the fourth digit will start flashing
11. Enter the fourth digit of the changed PIN by pressing the left turn signal “x” times
12. Press the Right turn signal once and then release as the fifth digit will start flashing
13. Enter the fifth digit of the changed PIN by pressing the left turn signal “x” times
14. Before the system rearms, turn off the ignition key for saving the new PIN

Use the new PIN for overriding the security alarm in Pre-2014 Harley-Davidson bikes

1. Turn the bike’s IGN key to Ignition and then immediately hold both turn signal switches until five dashes appear in the odometer window 
2. Enter the first digit of the PIN by pressing the left turn signal “x” times
3. Press the Right turn signal once and then move to the next digit
4. Enter the second digit of the PIN by pressing the left turn signal “x” times
5. Press the Right turn signal once and then move to the next digit
6. Enter the third digit of the PIN by pressing the left turn signal “x” times
7. Press the Right turn signal once and then move to the next digit
8. Enter the fourth digit of the PIN by pressing the left turn signal “x” times
9. Press the Right turn signal once and then move to the next digit
10. Enter the fifth digit of the PIN by pressing the left turn signal “x” times
11. Press the Right turn signal once and then move to the next digit
12. Now, press the right turn signal switch once and the security system alarm will be turned off

How to disarm the security system of your Harley-Davidson bike?

If you’ve got a Harley-Davidson bike, you’ll want to know how to turn off the security system with the PIN – 

• Turn on the ignition on your bike and use turn-signal buttons to signal left or right.
• Your motorcycle’s computer screen will show where to enter the PIN code.
• For entering the code, use the turn signal for choosing the value of each digit. For instance, to enter 3, press it three times.
• Enter the first number. After that, click on the button with the right-turn signal. The next number would be in the next empty cell.
• Put the code on the screen before pressing the right-turn signal key. Once it is finished, turn off your bike.

As long as you follow the directions carefully, you’ll be able to deactivate your bike’s sophisticated security system with ease.

How to read the security codes on your Harley-Davidson bike?

If you’re having issues reading or obtaining your motorcycle’s security code, here’s how you can resolve the issues. Here is a simple procedure to read the security codes on your bike.

• Once you have pressed the reset button, the warning lights and background will turn on. On the screen, you’ll notice that DIAG has appeared.
• Press the Reset button, and you’ll see a screen with the words PSSPt has popped up.
• This is a place where you’ll see the codes that will represent different parts of the system.
• You can go into the module that has got what you’re looking for. It’ll have a list of diagnostic codes that can be used for troubleshooting the issue.

Conclusion

Thank you for reading. Hopefully, now you know a lot more about the Harley-Davidson key fob, how do you reset a Harley-Davidson key fob, overriding PIN pre and post-2014 Harley-Davidson models, and more. Resetting a Harley-Davidson key fob is pretty easy, and it involves selecting an easy-to-remember PIN, turning on the ignition, pushing the left-turn and right-turn signals, and inputting the new PIN. Lastly, turn off the key to complete the key fob reset.